7) Press "-" button for gloss. Make sure the correction value [a] is set to "-1" and press "OK". The setting range is from "-2" to "+2". (Default: 0) Changing the value

causes fixing temperature to change accordingly.

[Note] Changing the value may cause glossiness of image may slightly decrease.

8) Output the image having shown the symptom, and check that the symptom does not occur. If the symptom no longer occurs, the work is completed. If the symp-

tom does not improve, set the value to "-2" in the step 7).

1.1.1.3.6 Coarse image from the leading edge to about 100mm from the trailing edge of paper

0031-9004

[ Verified by Canon Inc. ]

Symptom

Coarse image [a] may occur from the leading edge to around 100mm from the trailing edge of paper with a Bk halftone image under high temperature and high

humidity environment.

The arrow [b] indicates the feed direction.

1-13

Table of Contents