Make sure to place the last output if the multiple third test pages are output. To perform more precise full adjustment, you can increase the number of sheets for test

pages in "Number of Sheets to Output for Test Page". In this case, multiple third test pages are output.

2-8) Remove the third test page from the platen glass.

[Caution]

After changing the settings, make sure to perform the automatic gradation adjustment first, and then perform the color balance adjustment as the color balance may

become unstable.

1.1.1.3 Uneven Density

1.1.1.3.1 Uneven image gloss

0031-5503

[ Manual-related ]

Description

Uneven image gloss occurs.

Field Remedy

[Caution]

This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to

change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.

Select Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Correct Uneven Gloss > adjust the temperature control level by pressing "-" or

"+" > press OK.

The increase of temperature can be strongly controlled by increasing the value

[Reference]

- Increasing the value requires the machine to take a long time to control the temperature. This may result in a slight decrease of the machine's productivity.

- If this function is adjusted, this may affect the paper curl status. Readjust the curl correction level as needed.

Select Settings/Registration > Adjustment/Maintenance > Adjust Action > Correct Curl for Each Paper Drawer > select the Paper Drawer to adjust curl straightening

> Settings > adjust the correction amount for the Face Up Output and Face Down Output by pressing "-" or "+" > press OK.

1-4

Table of Contents