Points To Note After Replacing Pre-Transfer Charging Wire - Canon imagePRESS C800 Series Troubleshooting Manual

Chapter 1
FM0-1366 LASER SCANNER ASSEMBLY (COLOR)
FM0-1367 LASER SCANNER ASSEMBLY (BLACK)

1.1.7.1.46 Points to note after replacing Pre-transfer Charging Wire

0031-6195
[ Manual-related ]
Description
Please explain the actions to take after replacing the Pre-transfer Charging Wire.
Field Remedy
1) Clear the parts counter.
Service Mode > Service Mode > COPIER > Counter > PRDC-1 > PO-WIRE (Pre-transfer Charging Wire parts counter)
2) Execute the Charging Wire cleaning.
Service Mode > COPIER > Function > CLEANING > WIRE-EX (Cleaning of Charge Wire (5-reciprocation))
3) Execute the ITB neutral position adjustment.
Service Mode > COPIER > Function > INSTALL > INIT-ITB (Creation of ITB edge profile)
4) Execute the Auto Adjust Gradation.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust Gradation > Full Adjust
5) Execute the color displacement correction.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Correct Color Mismatch
6) Execute the uneven density correction.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Correct Shading
[Reference] The replacement timing for the Pre-transfer Charging Wire is as follows.
- imagePRESS C800: 600,000 sheets
- imagePRESS C700: 500,000 sheets
FL2-8807 PRE-TRANSFER CORONA LINE ASS'Y
1-133