Preparing Cables For Cable Entries With Sealing Modules; Figure 6-21 Preparing Control Cables For Sealing Modules - ABB ACS5000 User Manual

6.8.1.1. Preparing cables for cable entries with sealing modules

1. Unscrew the frame and remove the sealing modules.
For information on removing and installing the sealing modules and using the
compression wedge, see "Appendix A - Additional manuals".
2. Prepare the cables with an outer cable screen for EMC bonding with the metal
enclosure of the cabinet as illustrated.

Figure 6-21 Preparing control cables for sealing modules

1) Sealing module
2) Conductive foil
3) Cable sheath removed to expose cable
shield
PRODUCT
ACS5000W
1
2
3
4
4
4
DOCUMENT KIND
User manual
4) Conductor screen extension to be
connected to PE terminal
DOCUMENT ID.
3BHS799208 E01
ELECTRICAL INSTALLATION
REV. LANG. PAGE
F en 108/178