Mitsubishi Electric MELSEC iQ-R Series Migration Manual page 11

Servo system controller motion controller
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

[Operating Precautions]
When changing data and operating status, and modifying program of the running programmable
controller from an external device such as a personal computer connected to an intelligent
function module, read relevant manuals carefully and ensure the safety before operation.
Incorrect change or modification may cause system malfunction, damage to the machines, or
accidents.
Do not power off the programmable controller or reset the CPU module while the setting values
in the buffer memory are being written to the flash ROM in the module. Doing so will make the
data in the flash ROM and SD memory card undefined. The values need to be set in the buffer
memory and written to the flash ROM and SD memory card again. Doing so also can cause
malfunction or failure of the module.
Note that when the reference axis speed is specified for interpolation operation, the speed of
the partner axis (2nd, 3rd, or 4th axis) may exceed the speed limit value.
Do not go near the machine during test operations or during operations such as teaching. Doing
so may lead to injuries.
[Disposal Precautions]
When disposing of this product, treat it as industrial waste.
When disposing of batteries, separate them from other wastes according to the local
regulations. For details on battery regulations in EU member states, refer to the MELSEC iQ-R
Module Configuration Manual.
[Transportation Precautions]
When transporting lithium batteries, follow the transportation regulations. For details on the
regulated models, refer to the MELSEC iQ-R Module Configuration Manual.
The halogens (such as fluorine, chlorine, bromine, and iodine), which are contained in a
fumigant used for disinfection and pest control of wood packaging materials, may cause failure
of the product. Prevent the entry of fumigant residues into the product or consider other
methods (such as heat treatment) instead of fumigation. The disinfection and pest control
measures must be applied to unprocessed raw wood.
CAUTION
CAUTION
CAUTION
A - 9

Advertisement

Table of Contents
loading

Table of Contents