Huawei IPE Series Installation Manual page 82

IPE
Installation Guide
Step 2 Remove the three fastening screws and the flange of the high-speed dome IPC, as show in
Figure 7-11.
Figure 7-11 Removing the flange of the high-speed dome IPC
Step 3 Put the main body of the IPC into the embedded bracket and fasten the main body using three
screws, as shown in Figure 7-12.
Figure 7-12 Fixing the main body of the high-speed dome IPC onto the bracket
Step 4 Cut a hole with a diameter of 240 mm on the suspended ceiling. The diameter error is 2 mm.
Issue 03 (2013-02-28)
NOTE
Do not touch the inside and outside of the dome directly with hands or other objects. Otherwise, the
video quality is affected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
7 Installing a Day & Night High Speed Do me IPC
75