Huawei IPE Series Installation Manual page 64

IPE
Installation Guide
Figure 6-14 Disassembling the bracket and dome IPC
Step 2 Assemble the module that is equipped with the multi-connector cable, as well as the wall-
mounted bracket.
Route the multi-connector cable on the module through the elbow of the wall-mounted
bracket. Push the module into the wall-mounted bracket and rotate the module clockwise for
about five degrees until the module cannot be rotated any further.
Step 3 Use the three black screws that are removed in Step 1 to fix the module onto the wall-
mounted bracket, as shown in Figure 6-15. (Spare screws are available in the accessory kit of
the wall-mounted bracket.)
Figure 6-15 Fixing the black lower cover of the IPC onto the bracket
Multi connector cable
Issue 03 (2013-02-28)
Upper cover
Bracket
-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
6 Installing an Infrared Do me IPC
Module Inner liner
Lower cover
Black screws
57