Huawei IPE Series Installation Manual page 41

IPE
Installation Guide
Figure 5-13 Installing the IPC on a wall-mounted bracket
Step 1 Disassemble the dome IPC and the bracket, as shown in Figure 5-14. The dome IPC consists
of an upper cover, a module, an inner liner, and a lower cover. The lower cover is not used for
this installation mode.
Issue 03 (2013-02-28)
NOTE
For details about how to disassemble the dome IPC, see Step 1 and Step 2 in section5.2.1 "Installation
Precautions."
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5 Installing a Vandal-Proof Do me IPC
34