Huawei IPC2702-VF-VP Quick Start Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Security Camera
  5. IPC2702-VF-VP
  6. Quick start manual

Huawei IPC2702-VF-VP Quick Start Manual

Hide thumbs Also See for IPC2702-VF-VP:
Table of Contents

Advertisement

Quick Links

IPC2702-VF-VP
V100R001C03SPC600
Quick Start Guide
Issue
10
Date
2014-02-25
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei IPC2702-VF-VP

Summary of Contents for Huawei IPC2702-VF-VP

  • Page 1 IPC2702-VF-VP V100R001C03SPC600 Quick Start Guide Issue Date 2014-02-25 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 3 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
  • Page 4 Purpose This document provides a quick start for Vandal Dome Network Cameras, including the product features, hardware installation, network access, network configuration, daily maintenance, and troubleshooting. This document applies to eSpace IPC2702-VF-VP. Intended Audience This document is intended for: ...
  • Page 5 1.1 Safety Precautions Modified the safety precaution description. 4.1 Login and Logout Modified the login notes. 4.4 Setting Local Network Parameters Modified the local network page and parameter description. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 Updates in Issue 05 (2013-03-15) This issue is the fifth official release, compared to issue 04: Modified About This Document Modified special notices. 3.1 Preparing Installation Tools Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 This issue is the second official release, compared to issue 01: Modified Chapter 5 Troubleshooting Modified the steps for deleting browser cache. Issue 01 (2012-07-15) This issue is the first official release. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 8: Table Of Contents

    4.1 Login and Logout ..................19 4.2 Main Page Layout ..................20 4.3 Browsing Videos .................... 24 4.4 Setting Local Network Parameters ..............26 5 Troubleshooting............... 30 Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Installation Preparation

    The actual device governs, and this document is only for reference.  The device may be upgraded without prior notice.  For the latest programs and supplementary documentation, contact Huawei  customer service center. If any problems occur during use, contact the supplier or customer service ...
  • Page 10 Use a soft and dry cloth to clean the device. If there is any dirt that is difficult to clean, place a few drops of mild detergent on a soft and clean Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Checking The Installation Environment

    In addition, water seepage, water dropping, and dew forming are not allowed. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 12: Unpacking Inspection

    Swell plastic button (Φ5.6 mm x 29 mm) American-made round head screw RJ45 network conversion adapter Double patch cord RS485 and alarm wiring terminal Power wiring terminal Warning label Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 13: Network Plan

    IPC2702-VF-VP Quick Start Guide 1 Installation Preparation 1.4 Network Plan Figure 1-1 shows the typical network diagram. Figure 1-1 Technical network diagram Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Device Ports And Description

    Figure 2-1 Vandal Dome Network Camera Hardware Connection Figure 2-2 shows the multi-head cable used by a Vandal Dome Network Camera, which is described in Table 2-1. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 Quick Start Guide 2 Device Ports and Description Figure 2-2 Multi-head cable Figure 2-3 shows the SD card slot, which is described in Table 2-1. Figure 2-3 SD slot Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 16 Otherwise, some data may be lost or the SD card may be damaged. Before installing or removing an SD card when the camera is running, stop video recording first. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 If the Alarm level is set to High, the camera will not alarm when the alarm input terminal signal is high, but alarm when the alarm input terminal signal is not high (low level). Figure 2-5 shows the alarm output connection. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 If connect to the AC external power supply, an external relay is needed, if not, it will damage the equipment and has the risk of electric shock. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Hardware Installation

    Installation Guide. The following describes how to install a Vandal Dome Network Camera in wall-mounted mode. Optional For accessories that may be required during installation, see 3.2.3 Accessories Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Installing A Dome Camera In Wall-Mounted Mode

    Step 5 Take out the three black 70 mm self-tapping screws from the PE accessory bag and insert them into the three holes. Step 6 Secure the half-dome camera on the wall, as shown in Figure 3-3. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 Step 1 Use the T15 screwdriver to loosen the three plum screws on the upper case, and remove the upper case, as shown in Figure 3-4. Figure 3-4 Loosing screws Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 Use the three black screws removed in Step 2 (or spare screws in the package) to secure the bottom cover in the lower case, as marked by label b in Figure 3-6. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 23 Figure 3-7 Removing the liner Step 5 Adjust the focus. Adjust the lens angle and fix the focusing lever. Install the liner and lock it into place. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 Step 7 Use the T15 screwdriver to tighten the three plum screw to ensure that no noticeable gap between the upper and lower cases, as shown in Figure 3-9. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 25: Optional Accessories

    Table 3-2 lists optional accessories that may be required during installation. Table 3-2 Optional accessories Accessory Picture Description Adapter An adapter can replace the camera lower case and is applicable ceiling-mounted installation. Wall-mounted bracket Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 Power box power applicable to wall- or corner-mounted installation.  Cables can be led out through the side or bottom hole. Column-mounted bracket Corner-mounted bracket Suspension bracket Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Quick Configuration

    Step 1 Open Internet Explorer, enter the IP address of the IP camera (default value: 192.168.0.120) in the address box, and press Enter. The login page is displayed, as shown in Figure 4-1. Figure 4-1 Login page Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 28: Main

    Figure 4-2 shows the main page layout. Table 4-1 describes the elements on the main page. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 You can perform the following operations in this area: Control  Switch between cameras.  Start or stop playing videos.  Enable or disable the audio.  Enable or disable the intercom function. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 You can click to view the fault information. Alarm icon When the device generates an alarm, the alarm icon is displayed. You can click to view the alarm information. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 If the password fails to be changed, the cause is displayed. (For example, the new password length couldn’t be less than eight.) Step 4 Click OK. The login page is displayed. ----End Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 32: Browsing Videos

    Customer level, and set Download unsigned ActiveX controls and Initialize and script ActiveX controls not marked as safe for scripting under ActiveX controls and plug-ins to Enable, as shown in Figure 4-5. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 ----End Description To browse real-time videos, click Live Video. The Live Video page is displayed, as shown in Figure 4-6. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Setting Local Network Parameters

    Preferred Domain Name System (DNS) server  Alternate DNS server  Procedure Step 1 Choose Device Configuration > Local Network. The Local Network page is displayed, as shown in Figure 4-7. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 35 IP Protocol IPv4 is the IP protocol that [Setting method] uses an address length of Select a value from the 32 bits. drop-down list box. [Default value] IPv4 Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 Server server. Enter a value manually. If the preferred DNS [Default value] server is faulty, the device 192.168.0.2 uses the alternate DNS server to resolve domain names. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37  If the message "Invalid IP Address", "Invalid Subnet Mask", "Invalid default gateway", "Invalid primary DNS", or "Invalid space DNS" is displayed, set the parameters correctly. ----End Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Troubleshooting

    Change the protocol, baud controlled. baud rate, or rate, and address in the address is web management system incorrect. to those used by the PTZ or dome. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39  Verify that the network cable is properly connected. The upgrade Obtain the correct package is upgrade package and incorrect. upgrade the IP camera again. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 SJ/T 11363-2006 standard. × : Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is above the limit requirement. Issue 10 (2014-02-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Table of Contents