Huawei IPE Series Installation Manual page 66

IPE
Installation Guide
Figure 6-17 Fixing the bracket on the wall
Step 7 Connect the video cable to the second video port. Check the video, adjust the lens angle, focus,
and viewing angle in the horizontal and vertical directions, and insert the SD card, as shown
in Figure 6-18.
Issue 03 (2013-02-28)
Positioning label
NOTE
If the module is found loose after the video adjustment is complete, fasten the screws on the module
again and then install the inner liner and upper cover of the dome IPC.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
6 Installing an Infrared Do me IPC
-
Self tapping screws
59