Mitsubishi Electric MELSEC iQ-R Series User Manual page 87

Error code Error name
3027H Recording Setting Error
3028H Recording Setting Error
3029H Recording Setting Error
3030H to 3031H Recording Setting Error
3032H Recording Setting Error
3033H Recording Setting Error
3034H Recording Setting Error
3040H to 3043H Control CPU Communication
Error
3045H Control CPU Communication
Timeout
3050H to 305EH Module Error
3060H to 3064H Module Error
3080H to 3089H Module Error
3090H Module Error
3092H to 3098H Module Error
3140H to 3142H Module Error
Error description
The program setting and FB/FUN file setting
in the CPU parameter are different from
those when the recording setting was
configured.
The program file and FB/FUN file are
different from the ones when the recording
setting was configured.
The device/label operation is not set to
"Save" in the event history setting of the
CPU parameter.
A recording setting file which is not
supported by the firmware version of the
target recorder module was written.
The mounting position and control CPU of
the recorder module differ from the one in
the recording setting.
A recording setting file which is not
supported by the firmware version of the
target recorder module was written.
The link-direct device, unit access device, or
CPU buffer memory access device specified
for collection does not have an access
destination or is out of range.
Failed to communicate data with the control
CPU module.
The data communication with the control
CPU module has timed out.






Corrective action
Please read the CPU parameter, and configure the
recording setting again.
Please read the program file and FB/FUN file, and
configure the recording setting again.
Please set device/label operation to "Save" in the event
history setting of the CPU parameter.
Please check the version of the recorder module, use a
compatible product, and then write the recording file
again.
Please check the mounting position and control CPU of
the recorder module.
Please check the version of the recorder module, use a
compatible product, and then write the recording file
again.
• Please review the device/label collection target
setting in the recording setting.
• If the Device/Label collection target setting is set to
the Device/Label batch setting, review the program
used to set recording.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
• Please take anti-noise measures.
• Please switch the CPU module to RUN after resetting
it. If the same error is displayed, a hardware error
may have occurred in the recorder module. Please
consult your local Mitsubishi representative.
5 TROUBLESHOOTING
5.5 Recorder Module
5
85