Mitsubishi Electric MELSEC iQ-R Series User Manual page 66

Item
Saving Path Setting Method
Format Setting
(1) Simple
Specification
(2) Detailed
Specification
Saving Path Example
*1 A format can be specified.
*2 Can be set only when selecting the checkbox of "Add Date and Time <Datetime>."
*3 Case-sensitive
*4 Can be set only when selecting the checkbox of "Add."
*5 Cannot be set if the name of a recording file exceeds 64 characters.
3 RECORDING SETTING
64
3.5 Saving Path Setting
Add File Saving Trigger Date (yyyymmdd)
Add File Saving Trigger Time (hhmmss)
Add Date and Time <Datetime>
*2
Date and Time Type
*2
Date and Time Format
Add Value Data Add
Value Data
Device
Value
Representation
Number of Digits
for 0 Padding
Format
Description
Select "Simple Specification" or "Detailed Specification."
• Simple Specification: To set only whether to add the date and time
when a file saving trigger is satisfied to a file name.
• Detailed Specification: To set whether to add the following items to a
file name:
Date and time (when a file saving trigger is satisfied or a recording file is
*1
saved)
Numerical value data
Any characters
Select the checkbox to add the date and time when a file saving trigger
occurs to a file name.
(Example) February 23, 2019: 20190223
Select the checkbox to add the time when a file saving trigger occurs to a
file name.
(Example) 18:53:04: 185304
Select the checkbox to add a date and time to a file name.
The date and time according to the settings in "Date and Time Type" and
"Date and Time Format" is added to the position of <DATETIME>
specified for "Format."
Select the type of date and time information to be added ("File Saving
Trigger Date and Time" or "File Creation Date and Time").
Set the output format of the date and time column (2 to 24 characters).
The following reserved words
• YYYY: Year (4 digits)
• YY: Year (2 digits)
• MM: Month (2 digits)
• DD: Day (2 digits)
• ddd: Day of the week (3 digits)
• hh: Hour (2 digits)
• mm: Minute (2 digits)
• ss: Second (2 digits)
Select the checkbox to add numerical value data to a file name.
Numerical value data according to the settings in "Add Value Data" is
added to the position of <DATA1> or <DATA2> specified for "Format."
<DATA1> or <DATA2> is displayed.
The address of the buffer memory that stores numerical value data is
displayed.
Select an output format of numerical value data to be added (decimal or
*4
hexadecimal).
Specify the number of digits for zero padding in numerical value data to
*4
be added.
The range of numerical values that can be set differs depending on the
data format as follows:
• Decimal: 2 to 10
• Hexadecimal: 2 to 8
Set the format of a file name (up to 34 characters).
ASCII characters and the following reserved words can be entered.
• <DATETIME>
• <DATA1>
• <DATA2>
An example of a file name based on the current setting is displayed.
• /XXXX_nTS01_001
XXXX: Additional information based on the current setting
_: Omitted when not adding additional information
n: Number of a recording setting (1 to 4)
TS01: Displayed fixedly as a character indicating a saving cause
_001: Displayed fixedly as a folder number
For details on save destinations and file names, refer to the following:
Page 32 Recording file
*3
can be specified.
*5