Mitsubishi Electric MELSEC iQ-R Series User Manual page 51

*1 Can be set only when selecting "Use" for "Device/Label Data Sampling."
*2 Differs depending on the module type.
R04CPU, R08CPU, R16CPU: 4 M Byte
R32CPU, R120CPU: 6 M Byte
Precautions
The buffer area for data sampling is a temporary area for sampling data. Set the total number of device and label points to be
sampled to a value smaller than or equal to the capacity of the buffer area setting for data sampling. Otherwise, an error
occurs when starting recording and the recording function does not run.
2 PARAMETER SETTING
2.1 CPU Parameters
2
49