Csv Output - Mitsubishi Electric AE-200A Instruction Book

5-3. CSV output

The operation data, such as charge parameters and metering device data, can be output in a CSV format.
Touch [Maintenance] in the menu bar, and then touch [CSV output].
Note: A separate license may be required to use the CSV output function. Only valid buttons can be selected on the screen.
Note: Refer to section 4-1-1 "Energy data output" for details about the USB memory device that can be used.
Note: File names, as well as date formats, delimiter characters, and temperature units (°C, °F) within the files output as CSV will
use formats set as initial settings. Refer to the Instruction Book (Initial Settings) for settings methods.
Charge Parameters
Charge Parameters
(30-minute intervals)
Important
● The USB memory device may not be recognized if you insert and remove it within a short time. If this happens, reset the
AE-200/AE-50.
(1) Remove the controller cover, and insert a USB memory device to the USB port.
(2) Touch [Charge Parameters] or [Metering device data] to output, then touch [Output as CSV file].
Note: It may take a few minutes to complete the download, depending on the data volume.
Note: Do not remove the USB memory device while the data is being output. A message will appear when the data output is
complete.
Note: When one or more AE-50/EW-50 controllers are connected, the AE-50/EW-50 data will also be output from the AE-200.
WT07992X02
76
Metering device data
Metering device data
(30-minute intervals)
Output as CSV file