Mitsubishi Electric AE-200A Instruction Book page 30

(1) Touch [Display switching] to set the display items.
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen
is set to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to display the data for
each AE-200, AE-50, and EW-50 individually.
Date range
Display target
Controller
Comparison target
Controller
Bar graph
Item
Date range
Display range
Display
Target
target
WT07992X02
Select [Day], [Month], or [Year].
Note: Only the data for the period during which the AE-200/AE-50/EW-50 was powered on will
appear in the graph. The data for the period during which the AE-200/AE-50/EW-50 was
powered off will not appear in the graph.
Select [EM block], [Block], [Group], or [Address] to display its data.
Select an EM block name, block name, group name, or address number to display its data.
<Display range: EM block>
An EM block name list will appear.
Note: If the EM block name has not been registered, ["EM block" + EM block number] will
appear.
Note: EM blocks of general equipment (connected via DIDO controller PAC-YG66DCA) groups
are excluded.
<Display range: Block>
A block name list will appear.
Note: If the block name has not been registered, ["Block" + block number] will appear.
Note: Blocks of general equipment (connected via DIDO controller PAC-YG66DCA) groups are
excluded.
<Display range: Group>
A group name list will appear.
Note: If the group name has not been registered, ["Group" + group number] will appear.
Note: General equipment (connected via DIDO controller PAC-YG66DCA) groups are
excluded.
<Display range: Address>
A unit address list will appear.
Note: To display input values of a built-in Pulse Input (PI), select the first option [PI].
Description
30
Display range
Line graph