Mitsubishi Electric AE-200A Instruction Book page 82

Item
■ File format
Row
Metering device
data (30-minute
intervals)
*1 The address will not appear for the measurement data when a built-in Pulse Input (PI) is used.
*2 Each value is the cumulative value between the start date and the end date.
*3 The value will not appear if the data does not exist.
*4 Each file contains the data of up to 62 days.
■ File sample
622
9/1/2015-11/1/2015
MCP 1
No.,Date,Count value(Ch1),Count value(Ch2),Count value(Ch3),Count value(Ch4)
1,2015/9/1,0:00,190887.43,872411.43,227424.88,55515.50
1,2015/9/2,0:30,190899.16,872420.12,227428.63,55526.70
1,2015/9/3,1:00,190905.22,872442.23,227435.74,55537.90
1,2015/9/4,1:30,190910.38,878449.77,227448.19,55549.84
1,2015/11/1,23,30,200014.38,87950.36,227925.19,60111.63
WT07992X02
Item
1st File Type 622
2nd Data range Start date + "–" + End date
(PI controller (PAC-YG60MCA) - without connection to an AE-50/EW-50
controller)
"MCP" + PI controller address + "–" + Time period (1–5)
(Built-in Pulse Input (PI) - without connection to an AE-50/EW-50 controller)
"MCP" + "–" + Time period (1–5)
(PI controller (PAC-YG60MCA) - with connection to one or more
AE-50/EW-50 controllers)
3rd MCP
"MCP" + AE-50/EW-50 No.
period (1–5)
(Built-in Pulse Input (PI) - with connection to one or more AE-50/EW-50
controllers)
"MCP" + AE-50/EW-50 No.
* AE-50/EW-50 No. will not be shown for the AE-200 data.
"No.,Date,Count value(Ch1),Count value(Ch2),Count value(Ch3),Count
4th Item
value(Ch4)"
(without connection to an AE-50/EW-50 controller)
MCP address
*2*3*4
5th– Data
(with connection to one or more AE-50/EW-50 controllers)
AE-50/EW-50 No. + MCP address
MCP 2, MCP 3, MCP 4
:
Description
Format
*
+ "–" + PI controller address + "–" + Time
*
+ "–" + Time period (1–5)
*1
+ Time period, Date, Time, MCP 1, MCP 2, MCP 3, MCP 4
*1
+ Time period, Date, Time, MCP 1,
82