Example Of Csv Files Output - Mitsubishi Electric G-50A Technical Manual

14.2.4 Example of CSV files output

Example of each output file is shown as below.
In addition, although each relevant datum is shown in each data column, the data value with the following
mark indicates abnormal data.
[-99] : Indicates that TG-2000A have failed to collect normal data from G-50A and PLC.
[ ] (Blank): Indicates that the power source for TG-2000A has been off.
(1) Trend data for temperature
(2) Trend data for watt-hour meter by block
Daily basis in a
designated period
(3) Trend data for electric energy (IC)
Daily basis in a
designated period
In a unit of 2 minutes in a designated period
The data apportioned in every block with an outdoor unit equipped
with WHM (watt-hour meter) are shown in a column of outdoor unit
and the data apportioned in every block with an indoor unit equipped
with WHM (watt-hour meter) are displayed in a column of indoor unit.
The data apportioned in every block with an outdoor unit equipped
with WHM (watt-hour meter) are displayed in a column of outdoor unit
and the data apportioned in every block with an indoor unit equipped
with WHM (watt-hour meter) are displayed in a column of indoor unit.
Selection is possible
in group, operating
block, and floor.
The apportioned electric power consumption
and its charge of every designated charging
block are displayed on the screen.
Electric power consumption and its charge
of every designated indoor unit, floor, and
charge block are displayed on the screen.
97