Mitsubishi Electric AE-200A Instruction Book page 67

(3) Touch [Date range] to open the [Select energy management data source] window.
Data-acquisition
(4) Select a data type and specify the data-acquisition period.
Data type
Data-acquisition period
(5) Touch [OK] to go back to the [Energy data output] screen.
(6) Touch [CSV output].
Note: Do not remove the USB memory device while the data is being output.
Item
■ File name
Data type: 5-minute intervals
"EnergyManagement"_"5MIN"_[YYYY]-[MM]-[DD]_[yyyy]-[mm]-[dd].csv
Data type: 30-minute intervals
"EnergyManagement"_"30MIN"_[YYYY]-[MM]-[DD]_[yyyy]-[mm]-[dd].csv
Data type: 1-day intervals
"EnergyManagement"_"1DAY"_[YYYY]-[MM]-[DD]_[yyyy]-[mm]-[dd].csv
Data type: 1-month intervals
"EnergyManagement"_"1MONTH"_[YYYY]-[MM]_[yyyy]-[mm].csv
Data type: 1-year intervals
"EnergyManagement"_"1YEAR"_[YYYY]-[yyyy].csv
File-name contents
[YYYY]
Energy
[MM]
management
[DD]
data
[yyyy]
[mm]
[dd]
■ File output destination
<without connection to an AE-50/EW-50 controller>
[Root folder of the USB memory]\[Serial No.]\"OperationalData"\"EnergyManagement2"\"AE"\[Date]
<with connection to one or more AE-50/EW-50 controllers>
[Root folder of the USB memory]\[Serial No.]\"OperationalData"\"EnergyManagement2"\"AE"
[AE-50/EW-50 No. (1–4)
*1 AE-50/EW-50 No. will not be shown for the AE-200 data.
Note: The AE-50/EW-50 data can be output from the AE-200.
Note: Only one AE-50's data can be output from the AE-50.
WT07992X02
Data type
period
Touch the [Data type] button to toggle through the following options: [5-minute intervals], [30-minute
intervals], [1-day intervals], [1-month intervals], and [1-year intervals].
Specify the date period to acquire the data.
Note: The date range that can be specified will vary, depending on the item selected in the [Data type] field.
Note: If [1-month intervals] or [1-year intervals] is selected in the [Data type] field, the data-acquisition period
cannot be specified.
Note: Only the data for the period during which the AE-200/AE-50/EW-50 was powered on will be output. The
data for the period during which the AE-200/AE-50/EW-50 was powered off will not be output.
Format
Start year
Start month
Start date
End year
End month
End date
*1
]\[Date]
Description
67
Cancel
OK