GE Moisture Image Series 1 Startup Manual page 94

Sample Requirements
Specifications
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Delta F Oxygen Cell (cont.)
Temperature:
-18 to 66°C
Inlet Pressure:
<-0.5 psig (use compressor)
-0.5 psig to 0.2 psig (use pump)
0.2 to 1.0 psig (standard range)
1.0 to 60 psig (use valve or regulator)
>60 psig (use pressure regulator)
Flow Rate:
0.5 to 1.5 liters per minute
Moisture:
No limits (avoid condensation)
Oil/Solvent Mist:
3
<0.5 mg/feet (standard range)
3
>0.5 mg/feet (use filter)
Solid Particles:
3
<2.0 mg/feet (standard range)
3
>2.0 mg/feet (use filter)
Note: STAB-EL™ cell is a registered trademark of the Delta F
Corporation.
April 2004
3-13