GE Moisture Image Series 1 Startup Manual page 48

June 2003
Partial Cut Away View
with I/O Connections
To wire the power line to the disconnect device:
1. Make sure the disconnect device is not energized,
by placing the switch in the OFF position and cutting
the main power source.
2. Run the appropriate cable between the disconnect
device and the electronics enclosure.
3. Wire the cable end at the disconnect device as described
in the instructions provided with that device.
4. Plug the socketed end of the cable into the appropriate
socket inside the Series 1 enclosure.
Installation 1-39
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com