Error Codes - JVC HM-DB1U Instructions Manual

Error Codes

Some error codes may appear on the TV screen when operating the VCR. Refer to the chart below for the solution.
CODE
● An attempt was made to dub a D-VHS recording
103
of a digitally copy protected program.
● While dubbing a D-VHS recording, digitally copy
protected information was input to this VCR.
● An attempt was made to make a S-VHS/VHS
105
recording of a signal from an i.LINK device other
than a digital tuner*.
● An attempt was made to make a S-VHS/VHS
107
recording using the timer function with "i.LINK"
selected on the digital tuner* side.
● When 720p, 1080i signals are recorded in STD
108
mode.
● Normal playback is being prevented by mosaic
201
noise, etc.
● An attempt was made to play back a tape
203
containing a copy protected program.
● An attempt was made to play back a tape
205
containing an invalid D-VHS recording.
● A signal containing too much data was input to
301
the i.LINK connector on this VCR.
* For details of a digital tuner, refer to the instruction manual of the digital tuner.
DESCRIPTION CORRECTIVE ACTION
● This VCR supports copy protection technologies such as
DTLA, and cannot record programs that employ digital
copy protection.
● The i.LINK connector on this VCR is intended only for
D-VHS recording. This VCR does not convert a digital
signal into an analog signal for recording. Switch to the
analog input for recording.
● The i.LINK connector on this VCR is intended only for
D-VHS recording. This VCR does not convert a digital
signal into an analog signal for recording. Also, it is not
possible to make a D-VHS recording on VHS tape. Switch
to the analog input for recording.
● Select HS mode to record program properly.
● Wait while the VCR calibrates itself so that it can output
a normal image.
● Even if you record a copy protected program, this VCR
cannot play it back.
● This tape cannot be played back on this VCR.
● There are too many devices with i.LINK connectors, such
as digital tuners and digital video cameras, connected to
the i.LINK connector on this VCR. Turn off any devices
that are not in use.
53
EN