Table of Contents
Advertisement
40
EN
i.LINK Set Up
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
VCR
CABLE
TV
/DBS
1
2
4
5
7
8
0
1 5
ATTENTION
If the i.LINK setting does not work, press [D-VHS] and
[STOP/EJECT ( 7/0 )] on the front panel simultaneously for
more than 5 seconds to reset the settings. The cassette is
automatically ejected.
LINC
You can control one of the i.LINK-compatible devices
connected to this VCR with the i.LINK cable. "LINC"
means to select one of the connected devices. After
establishing a LINC with an i.LINK-compatible device,
you're ready to control the i.LINK device.
LINC (Logical Interface Connection) involves establishing a
logical connection, as the abbreviation implies.
3
6
9
2 - 4
OTHER USEFUL FUNCTIONS (cont.)
i.LINK set up for connected device
When you connect i.LINK compatible devices to this
VCR, an i.LINK device number is assigned to each
device in the order of connection.
If you want to change the number, follow the procedure
below.
1
Access Main Menu screen
Press [MENU].
2
Access i.LINK Set screen
Press [%fi] to move the highlight bar (arrow) to
"i.LINK SET", then press [OK] or [#].
3
Confirm LINC setting
Check that "LINC" is
set to "AUTO". If not,
press [OK] or [#] to set
to "AUTO".
4
Reset Number
Press [%fi] to move
the highlight bar
(arrow) to "RESET
NUMBER", then press
[OK] or [#].
5
Return to normal screen
Press [MENU].
6
Set Number again
Connect the external devices one by one.
• Make sure to connect the VCR's AC power plug
to the AC outlet and turn on the external device
before connection.
• Each device will be numbered in the order of
connection.
NOTES:
● If you do not want to set i.LINK device number, set "LINC" to
"OFF" in step 3 .
● You cannot use the i.LINK connection depending on the type
of devices connected. In this case, set "LINC" to "OFF" in step
3 .
i.LINK SET
LINC
AUTO
RESET NUMBER
SELECT WITH( , ) AND(OK)
PRESS(MENU) TO END
i.LINK SET
LINC
AUTO
RESET NUMBER
SELECT WITH( , ) AND(OK)
PRESS(MENU) TO END
Advertisement
Table of Contents
