Table of Contents
Advertisement
7
Set recording speed
Press [REC SPEED] to set the recording speed.
● When i.LINK channel is selected, only "AUTO"
and "HS" can be selected for the recording
speed.
8
Return to normal screen
Press [PROGRAM] or [OK] or [#].
"PROGRAM COMPLETED" appears on the
screen, then press [PROGRAM] to return to
normal screen.
9
Engage timer recording standby mode
Press [TIMER (‰)].
The VCR turns off automatically and [‰] is
displayed on the front display panel.
To timer-record daily or weekly serials
Press [DAILY] (number [8]) or [WEEKLY] (number [9])
anytime during steps 3 through 7.
"DAILY" or "WEEKLY" appears on the Program screen.
● Pressing the button again makes the corresponding
indication disappear.
To use the VCR while it is in timer recording standby
mode
Press [TIMER (‰)] to disengage the timer recording
standby mode, then press [POWER] to turn on the VCR.
After using the VCR, DO NOT forget to re-engage timer
recording standby mode by pressing [TIMER (‰)];
otherwise, you cannot record the broadcast you want.
● When "AUTO TIMER" (
timer recording standby mode is automatically
engaged when the VCR is turned off. It is temporarily
canceled when the VCR is turned on. You do not have
to press [TIMER (‰)] to engage or disengage the timer
recording standby mode.
pg. 37) is set to "ON", the
NOTES:
● Even if a power failure occurs, the VCR keeps your timer
programs. However, the clock time is lost if it lasts for more
than 10 minutes.
As a result, when the power is supplied again to this VCR after
the power failure, the following will take place.
1. This VCR starts Auto Clock Set automatically to restore the
clock time.
2. If the clock time is restored correctly and "AUTO TIMER" is
set to "ON", each timer program you have made will start
at its start time unless its end time has elapsed.
● Programs that start after midnight must have the next day's
date.
● After timer recording is completed, the VCR turns off
automatically.
● You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
● If the tape reaches its end during timer recording, [ ‰ ], [ Q ],
and [ # ] on the front display panel will blink.
29
EN
Advertisement
Table of Contents
