Table of Contents
Advertisement
Video Remote
Control Timer
Programming
● Turn on the VCR and the TV (and/or Digital Set
Top Box).
● Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
5
1
IN F-1
VCR
CABLE
TV
/DBS
1
2
4
5
7
8
0
2 -
b
[AUX]
2
+
5
2 -
a
3
3
6
9
This VCR can perform analog recording of a program
which is timer-programmed on your Integrated HDTV (or
Digital Set Top Box).
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before inserting
the cassette.
2
Select analog input location on the VCR
On the front panel:
Press [CHANNEL +] or [–] to select "L-1" etc.
On the Remote:
a– Press [TV/VCR CH +] or [–] to select "L-1"
etc.
or
b– Press the 'Number' key [0(AUX)].
3
Set recording speed
Press [REC SPEED] to set the recording speed.
4
Set timer program on the Integrated HDTV.
● For timer programming method, refer to the
manual of the Integrated HDTV.
5
Engage recording standby mode.
Press [POWER] to turn off the VCR.
● The Integrated HDTV will activate the VCR to
automatically start recording through the Video
Remote Controller at the programmed time.
33
EN
Advertisement
Table of Contents
