Table of Contents
Advertisement
Other useful functions for recording
You can also use the following functions for recording.
● "VIDEO CALIBRATION" (S-VHS/VHS only) (
When this function is set to "ON", this VCR checks the
condition of the tape in use during playback and recording,
and compensates to provide the highest-possible pictures.
● Second Audio Recording (
This VCR's built-in MTS decoder enables reception of
Multichannel TV Sound broadcast.
To record a SAP program received, set "2ND AUDIO
RECORD" to "ON" using the menu screen.
NOTES:
When the channel is changed on the VCR;
● The "STEREO" indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
● The "SAP" indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
● Both indications appear when a stereo program is
accompanied by SAP sound.
● S-VHS Recording Mode (
pg. 38)
This VCR allows you to record on a D-VHS and S-VHS tape
with VHS picture quality.
● "S-VHS ET" (
pg. 36)
This function allows you to record on VHS tapes with
S-VHS picture quality. Tapes recorded using this function can
be played back on a VCR equipped with the S-VHS ET
function.
pg. 36)
pg. 37)
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab
27
EN
Advertisement
Table of Contents
