Yamaha YZF-R1 Series Service Manual page 762

A
1
P/W G/R Y
P G Y/R Gy/G Gy
L/B P/L G/B Y/G Gy/B Gy/R
L/W P/B G/L Y/B W W/R W/B
3
B/W R/W Br/W Br/B Dg Ch W/L W/Y
R/GR/G Sb/W G/L G/Y G G/B W/B W/G
*. Joint coupler for YZF-R1
**. Joint coupler for YZF-R1M
Is resistance ∞ Ω?
YES
→ Go to step 3.
NO
a. Replace the wire harness.
b. Turn the main switch to "OFF" and back to "ON", and then check the condition of the DTC using the
malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→ Service is completed.
NO
→ Go to step 3.
3. Defective meter assembly.
• Replace the meter assembly, and complete the service.
Refer to "GENERAL CHASSIS (6)" on page 4-23.
B
Br/W
B
W/G
Br/Y Lg L/W L/B G/W
W G/O Y
9-265
U0155 or Err (SCU)
1
P/W G/R Y Br/W
P G Y/R Gy/G Gy B
L/B P/L G/B Y/G Gy/B Gy/R
L/W P/B G/L Y/B W W/R W/B W/G
3
B/W R/W Br/W Br/B Dg Ch W/L W/Y Br/Y Lg L/W
R/GR/G Sb/W G/L G/Y G G/B W/B W/G W G/O Y
2
*
L/W L/W L/W L/W L/W L/W L/B L/B L/B L/B L/B L/B
**
L/W L/W L/W L/W L/W L/W L/W
L/B L/B L/B L/B L/B L/B L/B
L/B G/W