Yamaha YZF-R1 Series Service Manual page 606

Hide thumbs Also See for YZF-R1 Series:
Table of Contents

Advertisement

EAS20568
P0112, P0113
EAS33048
TROUBLESHOOTING
Item
• [P0112] Intake air temperature sensor: ground short circuit detected.
• [P0113] Intake air temperature sensor: open or power short circuit detected.
Fail-safe system
• Able to start engine
• Able to drive vehicle
Procedure
TIP
Perform this procedure when the engine is cold.
1. Connection of intake air temperature sensor coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
Is the coupler condition normal?
YES
→ Go to step 2.
NO
a. Connect the coupler securely or replace the wire harness and/or sub-wire harness.
b. Turn the main switch to "ON", and then check the condition of the DTC using the malfunction mode
of the YDT.
Is it in the "Recovered" condition?
YES
→ Go to step 8, and complete the service.
NO
→ Go to step 2.
2. Connection of wire harness coupler and sub-wire harness coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
Is the coupler condition normal?
YES
→ Go to step 3.
NO
a. Connect the coupler securely or replace the wire harness and/or sub-wire harness.
b. Turn the main switch to "ON", and then check the condition of the DTC using the malfunction mode
of the YDT.
Is it in the "Recovered" condition?
YES
→ Go to step 8, and complete the service.
NO
→ Go to step 3.
3. Connection of ECU coupler.
• Check the locking condition of the coupler.
9-109
P0112, P0113

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzf-r1m seriesYzfr1lYzfr1lcYzfr1mlYzf1mlc

Table of Contents