Installing The Rear Side Cover; Installing The Tail Cover; General Chassis (2) - Yamaha YZF-R1 Series Service Manual

Recommended lubricant
Silicone grease
IMU bolt
2.0 N·m (0.20 kgf·m, 1.5 lb·ft)
S
2
EAS31909

INSTALLING THE REAR SIDE COVER

The following procedure applies to both of the
rear side covers.
1. Install:
• Rear side cover "1"
a. Fit the projection "a" on the rear side inner
covers (YZF-R1)/rear side covers
(YZF-R1M) into the hole "b" in the rear
fender, and then tighten the rear side cov-
er bolts.
Rear side cover bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
S
1
1
b
a
1
GENERAL CHASSIS (1)
EAS33140

INSTALLING THE TAIL COVER

1. Install:
• Tail cover "1"
a. Fit the projections "a" on the tail cover "1"
into the holes "b" in the rear fender, and
then install the quick fasteners.
b
4-6
1
a
b
a
1