Assembling The Rear Wheel - Yamaha YZF-R1 Series Service Manual

EAS30163

ASSEMBLING THE REAR WHEEL

ECA21340
NOTICE
• Do not drop the wheel sensor rotor or sub-
ject it to shocks.
• If any solvent gets on the wheel sensor ro-
tor, wipe it off immediately.
1. Install:
• Wheel bearings
New
• Oil seal
New
Refer to "ASSEMBLING THE FRONT
WHEEL" on page 4-39.
2. Install:
• Wheel bearing ring nut
TIP
Apply locking agent (LOCTITE®) onto the two
symmetric places on the circumference of the
threads of the wheel bearing ring nut.
a
LT
a. Width: two grooves of the threaded portion
b. Length: more than 40 mm (1.57 in)
3. Tighten:
• Wheel bearing ring nut "1"
TIP
Use the wheel bearing ring nut tool "2" to tighten
the wheel bearing ring nut by turning it counter-
clockwise "a".
b
LT
Wheel bearing ring nut tool
90890-01574
YM-01574
Wheel bearing ring nut
80 N·m (8.0 kgf·m, 59 lb·ft)
LOCTITE®
4. Apply:
• Sealant
TIP
Apply Three Bond No. 1215B® between the
wheel bearing ring nut and the wheel surface.
4-48
REAR WHEEL
1
a
2