Yamaha YZF-R1 Series Service Manual page 16

Select - rotate the wheel switch up or down to
highlight the desired module or setting item and
then short push the wheel switch (briefly press
the wheel switch inward) to confirm the selec-
tion.
Triangle mark - certain setting screens have an
upward pointing triangle mark item. Select the
triangle mark to save setting changes made and
exit that screen.
TIP
• Should vehicle motion be detected, the screen
will automatically exit MENU and change to the
main screen.
• To ensure that the desired setting changes are
saved, be sure to exit via the triangle mark.
Simply performing a long push and exiting the
MENU screen entirely may not save setting
changes.
"Display Mode"
There are two main screen display modes,
STREET MODE and TRACK MODE.
[To set the main screen display mode]
1. From the MENU screen, select "Display
Mode".
MENU
MPH
Display Mode
YRC Setting
Lap Time
Logging
Maintenance
Unit
2. Select "STREET MODE" or "TRACK MODE"
(or select the triangle mark to exit).
Display Mode
MPH
STREET MODE
TRACK MODE
3. Long push the wheel switch to exit the MENU
screen or use the wheel switch to select an-
other module.
"YRC Setting"
This module allows you to customize the four
YRC modes MODE-A, MODE-B, MODE-C, and
MODE-D by adjusting the setting levels (or on/
off status as applicable) of YRC items PWR,
TCS, SCS, LCS, QSS, LIF, EBM, and BC. For
YZF-R1M, you can select the ERS mode to be
associated with each YRC mode, and also ad-
just the setting levels of the ERS modes.
TIP
• TCS has 9 setting levels and ERS has 6
modes.
• Whenever there are more selections (setting
levels or modes) available than can be shown
on the screen at one time, a scroll bar will ap-
pear to notify you that additional selections are
available by scrolling.
PWR
Select PWR-1 for the most aggressive throttle
response, PWR-2 and PWR-3 for smoother
throttle grip/engine response, and use PWR-4
for rainy days or whenever less engine power is
desirable.
10 : 00
GPS
1. PWR 1
10 : 00
2. PWR 2
3. PWR 3
4. PWR 4
5. Throttle valve opening
6. Throttle grip operation
TCS
This model uses a variable traction control sys-
tem. For each setting level, the further the vehi-
cle is leaned over, the greater the amount of
traction control (system intervention) is applied.
There are 9 setting levels available. Setting level
1-7
FEATURES
1
5
6
2
3
4