Generator - Yamaha YZF-R1 Series Service Manual

EAS20134

GENERATOR

Removing the stator coil and generator rotor
6 N ・ m (0.6 kgf ・ m, 4.4 lb ・ ft)
15 N ・ m (1.5 kgf ・ m, 11 lb ・ ft)
(8)
3
1st
*
2nd
15 N ・ m (1.5 kgf ・ m, 11 lb ・ ft)
*
Following the tightening order, loosen the bolt one by one, and then retighten it to the specific
torque.
Order
Engine oil
1 Stator coil coupler
2 Crankshaft position sensor coupler
3 Generator cover
4 Generator cover gasket
5 Dowel pin
6 Stator coil lead holder
Stator coil assembly (stator coil/crankshaft posi-
7
tion sensor)
F W F W
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
LT
6
2
1
LT
LT
7
4
6 N ・ m (0.6 kgf ・ m, 4.4 lb ・ ft)
3.0 N ・ m (0.30 kgf ・ m, 2.2 lb ・ ft)
Specified angle 90˚
Job/Parts to remove
D D
5
E
85 N ・ m (8.5 kgf ・ m, 63 lb ・ ft)
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
'
Q ty
Drain.
Refer to "CHANGING THE ENGINE OIL" on
page 3-29.
1 Disconnect.
1 Disconnect.
1
1
2
1
1
5-44
GENERATOR
5
Remarks