Control From Remote Pushbuttons; Table 1.5.3.1-1: Setup For Control From Keyboard (Factory Setup); Table 1.5.3.2-1: Example Setup For Pushbutton Control - GE AV-300i User Manual

Table 1.5.3.1-1: Setup for Control from Keyboard (Factory Setup)

Parameter description
Command select
En/Disable mode
Dig Enable src
Term StrStp src
Dig StrStp src
Term Start src
Term Stop src
FStop src
Jog cmd src
Jog invers src
Spd 0 dis dly
Spd 0 speed thr

1.5.3.2 Control from Remote Pushbuttons

Command select = "Terminal edge"
This setup is useful for simple, standalone istallations where no PLC is used and the external relay logic is
minimal.
The keyboard/display module is not required, a LED module can be used instead. Momentary action pushbuttons
are used for Start, Stop, Jog and Jog inversion, with the mandatory Terminal Enable permissive.
En/Disable control logic and Jog are active.
No input is set for Fast stop command.
Parameters can be set as per example in table 1.5.3.2-1.
Complete wiring information for digital inputs may be found in the hardware reference section. The drive behaviour
is similar to the one for keyboard control (sect. 1.5.3.3.1), but for the fact that the four remote wired pushbuttons
replace the corresponding keys on the keyboard.
Of course there is no need to use a [Shift] button as remote buttons do not have multiple functions.
Parameter description
Command select
En/Disable mode
Dig Enable src
Term StrStp src
Dig StrStp src
Term Start src
Term Stop src
FStop src
Jog cmd src
Jog invers src
AV-300i Version 2 User's Guide
Index Value
4002 Stop/FS & Spd=0
4004 I O keys
0156 Do not care
0153 "DI 1 mon"
0157 Do not care
9210 Do not care
9211 Do not care
0154 "NULL"
8015 "NULL"
8018 "NULL"
4006 1000 msec
3724 10 rpm

Table 1.5.3.2-1: Example Setup for Pushbutton Control

Index Value
4002 Terminal edge
4004 Stop/FS & Spd=0
0156 Do not care
0153 "NULL"
0157 Do not care
9210 "DI 1 monitor"
9211 "DI 2 monitor"
0154 "NULL"
8015 "DI 3 monitor"
8018 "DI 4 monitor"
—————— Function Description ——————
Comments
This source bypassed (AND logic)
This source bypassed (AND logic)
This source not used
This source not used
This source not used
Fast stop not used
Jog from the keyboard
Jog inversion from the keyboard
Comments
This source bypassed (AND logic)
This source bypassed (AND logic)
This source not used
Tie Start button to terminal 13
Tie Stop button to terminal 14
Fast stop not used
Tie Jog button to terminal 15 (Jog used)
Tie Jog invert button to terminal 36 (Jog used)
TAV35311
TAV35321
Ch.1
63