Communication Via The Isbus Card (Isbus) - GE AV-300i User Manual

Drv->SBI Word
Drv->SBI W src
Drv SBI W0 src
............
Drv SBI W5 src
Drv->SBI word
Drv->SBI W cfg
Int Drv SBI W0
............
Int Drv SBI W5
Drv->SBI word
Drv->SBI W mon
Drv SBI W0 mon
............
Drv SBI W5 mon
SBI->Drv word
SBI->Drv W mon
SBI Drv W0 mon
............
SBI Drv W5 mon

1.13.3 Communication via the ISBus Card (ISBus)

Configuration for the data exchange with the ISBus card. As for the process channel programming see the
description of the Field Bus communication Block. For further details see the specific manual.
The interface is made of 8 writing Words plus 8 reading Words
N !
OTE
The ISBus card cannot be used with a DGFC option card since
they both occupy the same card mounting space.
For more information to see the following documents for related information on ISBus:
GEI 100424 AV-300i ISBus option instructions
GEH 6308 GE Installation Guidance Service
GEH 6405B Control System Toolbox for AV-300i
GEH 6408A Control System Toolbox, using the trend recorder
GEP 4195 Innovation Controller Product Catalog
GEH 6402 Control System Toolbox for Innovation Series Controller
GEH 6410 System manual for Innovation Series Controller
Ch.1
134
GEH-6641E
Word 0 channel source of the PCD channel on the Drive output
............
Word 5 channel source of the PCD channel on the Drive output
Internal value configuration (standard connected on W0 src)
............
Internal value configuration (standard connected on W5 src)
Word 0 monitor of the PDC channel on the Drive output
............
Word 5 monitor of the PDC channel on the Drive output
Word 0 monitor of the PDC channel on the Drive input
.............
Word 5 monitor of the PDC channel on the Drive input
—————— Function Description ——————