Drive Status Menu (Status); Status; State Of The Digital Inputs/Outputs (I/O Status) - GE AV-300i User Manual

1.2 DRIVE STATUS MENU (STATUS)

This menu displays a series of variables useful to check the Drive state.
The variable function is clearly explained by the variable name.
In case it is needed, a short explanation is added.
Some variables are not applicable to all the different regulation modes.
In this case the display does not show the variable name but the writing N/A, "Not Available".
The status variables are noted with a letter to show any ties to a specific regulation mode:
Sensorless
S
Field oriented
F
V/f
V
If a variable is not available with a specific regulation mode, the system writes on its side the mode with which it
is active. Example: Torque ref [S, F], valid only with S and F.

1.2.1 Status

STATUS
Output voltage
Output current
Output power
Torque ref[S, F]
Output frequency
Norm speed
Speed ref
Ramp ref
Enable SM mon
Start SM mon
FastStop SM mon

1.2.2 State of the Digital Inputs/Outputs (I/O Status)

Menu displays the state on the Drive Digital inputs and outputs, at the drive terminal points.
The first line shows the numbers of the digital I/Os.
The second line shows, under each number, the I/O state (0 or 1). The state detects the voltage presence (1) or absence (0).
'E' Enable terminal
'A' Terminal 10 Digital input 10
'B' Terminal 11 Digital input 11
'X' Expanded
AV-300i Version 2 User's Guide
Voltage on the output terminals [ V ]
Current on the output terminals [ A ]
Power on the output terminals [ kVA ]
Torque reference on the motor [Nm]
Output frequency [Hz]
Motor speed [rpm]
Motor speed reference [rpm]
Ramp Reference [rpm]
It shows the Drive Enable state (1= on , 0 = off )
It shows the Drive Start state (1= on , 0 = off )
It shows the Drive Fast Stop state (1= on , 0 = off )
—————— Function Description ——————
Ch.1
25