3
Installing the CE Decals
Parts needed for this procedure:
1
Warning decal (104-5181)
1
Warning decal (99-3558)
3
Warning decal (107-1972)
Procedure
If this machine will be used for CE, affix the
CE-warning decals over the corresponding English
warning decals.
4
Installing the Hood Latch
CE Only
Parts needed for this procedure:
1
Lock bracket
2
Rivet
1
Washer
1
Screw (1/4 x 2 inches)
1
Locknut (1/4 inch)
Procedure
1.
Unhook the hood latch from the hood-latch
bracket.
2.
Remove the 2 rivets securing the hood-latch
bracket to the hood
(Figure
6).
1. Rivets
3.
Remove the hood-latch bracket from the hood.
4.
While aligning the mounting holes, position the
lock bracket and the hood-latch bracket onto the
hood
(Figure
7).
Note:
The lock bracket must be against the
hood.
Note:
Do not remove the bolt and nut from the
lock-bracket arm.
1. Lock bracket
5.
Align the washers with the holes on the inside of
the hood.
6.
Rivet the brackets and the washers to the hood
(Figure
7).
7.
Hook the latch onto the hood-latch bracket
(Figure
8).
15
Figure 6
2. Hood-latch bracket
Figure 7
2. Bolt and nut
g031570
g012629