Installing The Mulching Baffle; Product Overview; Controls - Toro Groundsmaster 3500-D Operator's Manual

10
Installing the Mulching
Baffle
Optional
No Parts Required
Procedure
1. Thoroughly clean debris from the mounting holes
on the rear wall and left wall of the chamber.
2. Install the mulching baffle in the rear opening
and secure it with 5 flange-head bolts
20).
Figure 20
1. Mulching baffle
3. Verify that mulching baffle does not interfere with
the tip of the blade and does not protrude inside
the surface of the rear chamber wall.
(Figure
g031579
2. Flange-head bolt

Product Overview

Controls

1. Tilt-steering lever
2. Angle indicator
3. Reverse traction pedal
Traction Pedals
Press the forward traction pedal to move forward.
Press reverse traction pedal to move backward or to
assist in stopping when moving forward
Note:
Allow the pedal to move or move it to the
position to stop the machine.
NEUTRAL
Mow/Transport Slide
Using your heel, move the mow/transport slide to the
left to transport, and to the right to mow
Note:
The cutting units operate only in the mow
position.
Important:
The mow speed is set at the factory
to 9.7 km/h (6 mph). You can increase or decrease
the mow speed by adjusting the speed-stop screw
(Figure 22).
20
Figure 21
4. Forward traction pedal
5. Mow/transport slide
6. Indicator slot
(Figure
(Figure
g031595
21).
21).