Setup - Toro Groundsmaster 3500-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
Media and Additional Parts
Description
Ignition keys
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator video
Declaration of Conformity
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
Inclinometer
Warning decal (104-5181)
Warning decal (99-3558)
Warning decal (107-1972)
Lock bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
Exhaust guard
Self-tapping screw
No parts required
No parts required
No parts required
No parts required
No parts required
Qty.
–
1
1
1
3
1
2
1
1
1
1
4
–
–
–
–
–
Qty.
2 Start the engine.
1
Read before operating the machine.
1
1 Use to look up and order parts.
1
View before operating the machine.
1 Ensure CE compliance.
12
Use
Activate, charge, and connect the
battery.
Check the angle indicator (Models
30807, 30839, and 30843 only).
Install the CE decals (if required).
Install the hood latch (CE only).
Install the exhaust guard (CE only).
Adjust the lift arms.
Adjust the carrier frame.
Adjust the height of cut.
Adjust the roller scraper (optional).
Install the mulching baffle (optional).
Use