Cleaning The Cooling System; Brake Maintenance; Adjusting The Parking Brake - Toro Groundsmaster 3500-D Operator's Manual

Hide thumbs Also See for Groundsmaster 3500-D:
Table of Contents

Advertisement

Cleaning the Cooling
System
Service Interval: Before each use or daily
1.
Turn the engine off and raise the hood.
2.
Clean the engine area thoroughly of all debris.
3.
Remove the access panel
Figure 58
1. Oil cooler
2. Radiator
4.
Unlatch the oil cooler and pivot it rearward
(Figure
59).
Figure 59
5.
Clean both sides of the oil cooler and radiator
area thoroughly with water or compressed air.
6.
Pivot the oil cooler back into position.
7.
Install the access panel and close the hood.
(Figure
58).
g031619
3. Access panel
g008915

Brake Maintenance

Adjusting the Parking
Brake
Service Interval: Every 200 hours—Check the
parking-brake adjustment.
1.
Loosen the set screw securing the knob to the
parking-brake lever
1. Knob
2. Set screw
2.
Torque the knob to 41 to 68 N∙m (30 to 40 in-lb)
to actuate the lever.
3.
Tighten the set screw.
48
(Figure
60).
Figure 60
3. Parking-brake lever
g031637

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 3505-d30807308393084330849

Table of Contents