Maintenance; Recommended Maintenance Schedule(S) - Toro Groundsmaster 3500-D Operator's Manual

Maintenance

Note:
Determine the left and right sides of the
machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 500 hours
Every 1,000 hours
Every 2 years
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Torque the wheel-lug nuts.
• Torque the wheel-lug nuts.
• Check the condition and tension of all belts.
• Change the hydraulic filter.
• Change the engine oil and engine-oil filter.
• Check the tire pressure.
• Check the safety-interlock system.
• Check the engine-oil level.
• Drain the water separator.
• Check the engine-coolant level.
• Clean debris off the radiator and oil cooler (clean them more frequently in dirty
conditions).
• Check the hydraulic-fluid level.
• Check the hydraulic lines and hoses.
• Check the blade stopping time.
• Check the electrolyte level. (If the machine is in storage, check it every 30 days.)
• Lubricate all of the bearings and bushings.
• Remove the air-cleaner cover and clean out the debris. Do not remove the filter.
• Check the condition and tension of all belts.
• Change the engine oil and engine-oil filter.
• Torque the wheel-lug nuts.
• Service the air-cleaner filter. (More frequently in extreme dusty or dirty conditions)
• Check the parking-brake adjustment.
• Change the hydraulic filter.
• Replace the fuel filter.
• Change the hydraulic fluid.
• Grease the bearings in the rear axle.
• Drain and clean the fuel tank.
• Drain and clean the fuel tank.
33