7 COMMANDS AND TARGETS
7 COMMANDS AND TARGETS 7.1 COMMANDS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The COMMANDS menu contains relay directives intended for operations personnel. All commands can be protected from
unauthorized access via the Command Password; see the PASSWORD SECURITY menu description in the PRODUCT
SETUP section of Chapter 5. The following flash message appears after successfully command entry:
Ø
PATH: COMMANDS
COMMANDS VIRTUAL INPUTS
COMMANDS
VIRTUAL INPUTS
MESSAGE
The states of up to 32 virtual inputs are changed here. The first line of the display indicates the ID of the virtual input. The
second line indicates the current or selected status of the virtual input. This status will be a logical state 'Off' (0) or 'On' (1).
Ø
PATH: COMMANDS
COMMANDS CLEAR RECORDS
COMMANDS
CLEAR RECORDS
GE Power Management
COMMANDS
Ø
COMMANDS
VIRTUAL INPUTS
COMMANDS
CLEAR RECORDS
COMMANDS
SET DATE AND TIME
COMMANDS
RELAY MAINTENANCE
COMMAND
EXECUTED
Virt Ip 1
Off
↓
↓
Virt Ip 32
Off
CLEAR FAULT REPORTS?
No
CLEAR EVENT RECORDS?
No
CLEAR OSCILLOGRAPHY?
No
CLEAR DATA LOGGER?
No
L90 Line Differential Relay
7.1 COMMANDS
7.1.1 COMMANDS MENU
7.1.2 VIRTUAL INPUTS
Range: Off, On
Range: Off, On
7.1.3 CLEAR RECORDS
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
7
7-1