Getting Started; Important Procedures; Cautions And Warnings; Inspection Checklist - GE UR Series Instruction Manual

1 GETTING STARTED

1 GETTING STARTED 1.1 IMPORTANT PROCEDURES
Please read this chapter to help guide you through the initial setup of your new relay.
Before attempting to install or use the relay, it is imperative that all WARNINGS and CAU-
TIONS in this manual are reviewed to help prevent personal injury, equipment damage, and/
or downtime.
WARNING CAUTION
• Open the relay packaging and inspect the unit for physical damage.
• Check that the battery tab is intact on the power supply module (for more details, see the section BATTERY TAB in this
chapter).
• View the rear name-plate and verify that the correct model has been ordered.
• Ensure that the following items are included:
• Instruction Manual
• Products CD (includes URPC software and manuals in PDF format)
• mounting screws
• registration card (attached as the last page of the manual)
• Fill out the registration form and mail it back to GE Power Management (include the serial number located on the rear
nameplate).
• For product information, instruction manual updates, and the latest software updates, please visit the GE Power Man-
agement Home Page.
If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE
Power Management immediately.
NOTE
GE POWER MANAGEMENT CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Power Management
215 Anderson Avenue
Markham, Ontario
Canada L6E 1B3
TELEPHONE: (905) 294-6222,
FAX: (905) 201-2098
E-MAIL: info.pm@indsys.ge.com
HOME PAGE: http://www.GEindustrial.com/pm
GE Power Management
Figure 1–1: REAR NAME-PLATE (EXAMPLE)
1-800-547-8629 (North America only)
L90 Line Differential Relay

1.1 IMPORTANT PROCEDURES

1.1.1 CAUTIONS AND WARNINGS

1.1.2 INSPECTION CHECKLIST

1
1-1