Table 26. Parts And Tools For Connecting Ac/Dc Convertor Ground Cable - Samsung RF4402d-D1A Installation Manual

Connecting AC/DC Convertor Ground Cable
To connect AC/DC Convertor Ground Cable
Make sure you have the following items:
1

Table 26. Parts and Tools for connecting AC/DC Convertor Ground Cable

Category Description
Installation Section MGB~ AC/DC Convertor Ground Terminal
Cable 6 AWG × 1C
Bend Radius 8 × OD
Heat Shrink Tube Ф 0.47 in. (12 mm)/Clear/1.96 in. (50 mm)
(Spec/Color/Length)
Pressure Terminal MGB Checking MGB specifications per site and preparing connecting parts
AC/DC 6 AWG, 2 Hole, Hole diameter:1/4 in. (6.4 mm), Hole spacing: 0.63 in. (16
Convertor mm)
Fastener MGB Checking MGB specifications per site and preparing connecting parts
AC/DC M6 × L14 SEMS (Hex. +)/2 EA
Convertor
Recommended M6 SEMS 43 lbf·in
Torque Value
Working Tools  Cable Cutter
 Wire Stripper
 Crimping tool
 Heating Gun
 Nipper
 Screw Driver ('+', No. 3)
 Torque Driver (20~90 lbf·in.)
 Screw Driver Bit ('+', No. 3)
For the pressure terminal or the cable, the UL Listed products or equivalent should
be used.
Ex) Manufacturer-Panduit
RRH: 6 AWG Pressure Terminal (LCD6-14A-L)
Install a ground cable from the MGB to the AC/DC convertor ground terminal.
2
RF4402d Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Confidential
Chapter 3 Connecting Cables
72