Figure 90. Connecting Ret Cable (1) - Samsung RF4402d-D1A Installation Manual

Before fitting the RET connector, make sure to align the female connector's hole
with the male connector's pin first.
Hole
[Female Connector]
Install an RET cable from the RF Antenna to the RRH RET port.
2
Figure 90. Connecting RET Cable (1)
[Bottom View]
Separate the cap from the system side connector (RET port).
3
Figure 91. Connecting RET Cable (2)
RET Port
RET Cap
RF4402d Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Chapter 3 Connecting Cables
Pin
[Male Connector]
RET Cable
Confidential
RF Antenna
RET Port (Female)
100