Place a mounting bracket on the fixing location, Check the level status using a
3
level and adjust the level of bracket assembly.
If the level status is normal, mark the anchor bolt holes on a wall.
4
Figure 53. Marking_Wall Type
Unit: in. (mm)/ : Marking Point
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
To drill anchor holes and fix anchors
Make sure you have the following items:
1
Table 18. Parts and Tools for Drilling & Anchoring
Category
Description
Parts
M10 Strong Anchor
Hammer Drill
Woking Tools
Concrete Drill Bit [0.55 in. (14 mm)]
Vacuum Cleaner
Hammer
Anchor Punch (For M10 Strong Anchor)
Table 19. Anchor Bolt Drill Bits and Hole Depth
Category
Anchor Bolt
RRH (Wall Type)
M10
RF4402d Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Chapter 2 Installing System
5.11 (130)
[1 Sector Side & Standard Mounting Bracket Assembly]
Drill Bits
0.55 in. (14 mm)
Confidential
4 EA/RRH
Hole Depth
1.73 in. (44 mm)
56