As different connector types may be used depending on the RF antenna type,
check the antenna connector before connecting the cable.
After connecting the connector, push waterproofing boots up to the connector
4
connection.
Figure 97. Connecting RF Cable_2T2R Connection (4)
1
Waterproofing
Boots
Insert the rubber for waterproofing boot to the system side RF ports.
5
(ANT1, ANT2)
Figure 98. Connecting RF Cable_2T2R Connection (5)
1
Waterproofing Boots
RF4402d Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Chapter 3 Connecting Cables
2
2
Confidential
Waterproofing
Boot
RF Cable
104