New And Changed Information; Revision History; Organization Of This Document; Related Documentation - Samsung RF4402d-D1A Installation Manual

New and Changed Information

This section describes information that has been added/changed since the previous
publication of this manual.

Added 'Make sure RF Power Feeding Off when connecting TMA'. (Chapter 1.
While Installation)

Revision History

The following table lists all versions of this document.
Document Version Publication Date
1.0 November 2018

Organization of This Document

Section Title
Chapter 1 Before Installation
Chapter 2 Installing System
Chapter 3 Connecting Cables
Chapter 4 Inspect the Installation
Appendix A Acronyms
Appendix B Sector Antenna Installation
Appendix C Clean the Optical Connectors
Appendix D Standard Torque

Related Documentation


LTE eNB System Description
RF4402d Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Confidential
Remarks
-
Description
This chapter introduces RRH and describes items
should be understood before installation.
This chapter describes the procedures to install
the RRH.
This chapter describes the procedures to connect
the cables to the RRH installed.
This chapter describes the procedures of
inspecting installation status after RRH
installation and cabling is completed.
This annex describes the acronyms used in this
manual.
This annex describes the sector antenna
installation.
This annex describes the procedure of cleaning
the optical connector and cleaning tool.
This annex describes the standard torque when
fastening the bolt.
Preface
x