Adjusting The Touch Panel; Restoring The Factory Settings - Sony SnapLab UP-CR20L Operating Instructions Manual

Adjusting the Touch
Panel
This function is used to calibrate the touch panel.
1
Open the System tab on the administration screen, and
touch the [Touch Panel Adjustment] button.
The touch panel adjustment screen appears.
A box appears on this adjustment screen.
2
Touch the box that appears on the screen.
When you touch the box, a new box appears at a
different location on the screen. Keep touching the
boxes as they appear. When no more boxes appear,
adjustment is complete.
56
Adjusting the Touch Panel / Restoring the Factory Settings
Restoring the Factory
Settings
To reset the unit back to its factory settings, open the
Administration tab on the administration screen, and then
touch the [Reset to Factory Settings] button.