Sony SnapLab UP-CR20L Operating Instructions Manual page 45

2
Touch the [Text Setting] button.
The text input screen appears.
3
Use the [Input] tab to input the text. Use the other tabs
to format the text.
[Input] tab
Touch the keys shown on the screen to enter text. You
can enter up to two lines, each containing up to 64
alphanumeric characters. To make a correction, touch
the [BS] (Backspace) button. If you keep touching the
button, the entire line where the cursor is located will
be erased.
[Font] tab
Lets you select the font to be used.
[Size] tab
Use the [+] and [–] buttons to control the text size. The
size setting range is 4 - 72 points, in 2-point steps.
[Position] tab
Lets you specify the location and orientation of the
text.
[Color] tab
Lets you specify the text color.
Note
Depending on the number of characters and text size
selected, it may not be possible to print the entire text
in some cases.
4
Once all of the text has been input, touch the [OK]
button.
The display returns to the Template tab.
5
Touch the [ON] button under [Text Input].
Using Expansion CompactFlash Cards
45