Chapter 6 Operation; Starting Operation - Sony SnapLab UP-CR20L Operating Instructions Manual

Operation

Starting Operation

Applicable modes: All operation modes
1
Touch the screen anywhere.
The language selection screen appears.
The above screen will not appear in the following
circumstances.
• When Event mode is set
• When only one language is set for use
Chapter
2
Touch the desired language.
A notice regarding the use of the unit appears. Read
the notice and then touch the [OK] button.
The input method selection screen appears.
3
Select the desired input method for the image data.
Memory Card
Select this method to load the image data from a
memory card (such as a "Memory Stick") or a USB
flash memory.
CD/DVD
Select this method to load the image data from a CD or
DVD.
4
If you selected [Memory Card], insert the memory
card into the slot on the front of the unit. If you
selected [CD/DVD], place the disk in the tray in the
front of the unit.
6
57
Starting Operation