Controls And Functions; Front - Sony SnapLab UP-CR20L Operating Instructions Manual

Controls and Functions

Front

Output tray removed
a Display
Shows the operation screen. Because the display is a touch
screen, the user simply touches the field for the desired
operation. The angle of the display can be adjusted for best
viewing.
b Memory card slots
A USB port (USB memory) (page 58)
Holds a USB memory device with stored image data.
B SD Card/MultiMediaCard slot (page 58)
Holds an SD Card, miniSD Card, or MultiMediaCard
with stored image data.
C "Memory Stick" slot (page 58)
Holds a "Memory Stick" with stored image data.
D Access indicator
Lights when a memory card is inserted a slot, and
flashes when a memory card is being accessed.
E xD-Picture Card slot (page 58)
Holds an xD-Picture Card with stored image data.
F CompactFlash card slot (page 58)
Holds a CompactFlash card with stored image data.
Note
To avoid loss of image data or damage to the main unit,
never attempt to insert a "Memory Stick," SD Card, or
MultiMediaCard into a CompactFlash type adapter set in
the CompactFlash slot.
c CD/DVD-ROM drive
Holds a CD or DVD with stored image data. You cannot
write to the CD or DVD.
d Output tray (page 22)
Collects printouts that are ejected.
e Output stopper (page 23)
Adjust the position according to the printing pack in use.
There are three positions to which to adjust.
f Output tray adapter (page 23)
Attach this to the output tray to prevent printouts from
falling out.
13
Controls and Functions